The glass processing specialists from Schraml Glastechnik in Austria are back. Following a lengthy development period, alongside the intensive preparations for the presentation of the new topDRILL drilling machines, it was recently possible to celebrate the market launch of the combiFIN complete processing line.
The combiFIN is a nifty combination of different vertical processing devices to create a single intelligent line, which typically consists of the following individual systems:
A special feature of the system is its development through close collaboration between LiSEC and Schraml, and the associated synergy that came into effect thanks to the expertise of both companies.
Horst Schraml, managing director of Schraml Glastechnik, explains a few of the highlights and unique features of the system:
HOW ARE THE MACHINES LINKED WITH EACH OTHER?
Horst Schraml: The devices are linked automatically. It is therefore only necessary to perform operation and programming on one machine. If necessary, the systems can also be used separately and independently.
HOW COMPLICATED IS OPERATION OF THE COMBIFIN?
Horst Schraml: Operation is significantly easier than operating complex all-in-one systems. Despite this, the devices deliver very high performance thanks to the respective focus on processing. Programming can be carried out in the office or on the machine, or even as a combination of both.
WHAT CYCLE TIMES CAN BE ACHIEVED WITH THE COMBIFIN?
Horst Schraml: Dividing processing up between at least two devices means that the cycle time is significantly reduced. Almost all doors, partition walls and similar products are completely finished in less than five minutes.
WHAT SHAPES IS THE SYSTEM ABLE TO PROCESS?
Horst Schraml: The system processes almost all glass lites sheets with a straight edge. Rounded and bevelled corners are processed with no cycle time losses. Thanks to the batch size of 1, the customer can process any glass lites sheets, thicknesses and shapes successively without limitation.
HOW EFFICIENT IS THE SYSTEM?
Horst Schraml: The use of series parts from the LiSEC or Schraml modular range means that the system is comparatively economical. In combination with its high level of productivity, this results in advantageous overall efficiency.
Horst Schraml: The systems are state-of-the-art and the combination can be used with either an MRX or RX drilling machine. All processing devices are optionally available for delivery with the water jet head or a range of processing heads. Interfaces with external software suppliers are tried, tested and available.
The combiFIN exhibits all the features of leading-edge machine construction technology. The systems conform to the Industry 4.0 schema. Remote maintenance and remote control are possible, while the configuration can also operate in any running direction and in a range of expansion stages. The only limitation is the maximum glass size, which is currently 3,210 x 2,000 mm; i.e. split-sized glass sheets.
Schraml Glastechnik GmbH has been working in wet processing for three decades now and was the world’s first provider of vertical glass drilling machines. Since 2017, Schraml Glastechnik GmbH has been part of the LiSEC group and the company can therefore optimally utilise LiSEC’s development and production capacities. By presenting the combiFIN, the system constructor has succeeded in taking a major technical leap forwards. The system is oriented towards current customer benefits and delivers not only technical but also financial advantages.
For further information please contact us via www.schraml.com or visit the combiFIN website at www.combifin.com.
Highlights of the GLX P1:
Highlights of the MRX G7:
Log in or register to post comments
Peter Lisec Straße 1, 3353 Seitenstetten Austria
Via Marcatutto 7, (Milano) Italy 20080 Albairate MI Italy
100 Schelkovskoye Highway, building 108, room 45 Moscow Moskva 105523 Russia
Im Vogelsang 18 3340 Waidhofen/Ybbs Austria
Via Fieramonti 1 04012 Cisterna di Latina LT Italy
No. 20 Binhe Road, High-tech Development Zone, Luolong Qu Luoyang Shi Henan Sheng , 471003 China
Via Abbondanza 11/13 22070 Carbonate CO Italy
3196 Thompson Road Fenton , MI 48430 United States
Carrer del Pla, 108-110, Pol. Ind. El Pla 08980 Sant Feliu de Llobregat Barcelona Spain
Ctra. Estación Km. 15.8 44415 Rubielos de Mora Teruel Spain
5 Atir Yeda st. Kfar Saba 4464305 Israel
V. alla Porada, 188 20831 Seregno MB Italy
F1601, A4, Zhujiang Plaza Longgang Qu Shenzhen Shi Guangdong Sheng , 518172 China
Via per Monastier, 4 31056 Vallio di Roncade TV Italy
Gavin Way, Nexus Point, Off Holford Drive, Birmingham B6 7AF United Kingdom
Changzhou Xingchen Industry Park Wujin Qu Changzhou Shi Jiangsu Sheng , 213119 China